Huazhu
1 / 5
Bilateral design transfers stress evenly across both glass panels, preventing micro-cracks.
Shore A 60/70/90 hardness rubber creates compression-tight barrier against leaks.
3.5mm ultra-low profile disappears when installed, maintaining glass' floating illusion.
Foolproof alignment markers reduce install time by 60% vs conventional clamps.
(Modular Upgrade Ready) Compatible with smart shower systems (pre-drilled channels for LED/steam fittings).
Insert glass panels into U-channel
Hand-tighten security bolts (8Nm torque)
Slide silicone cover caps into place
With the whole process of moulding, die-casting, machining, polishing, plating/powder coating/painting, inspection, assembly and shipment, we can strictly control every step of the production to ensure quality and improve product qualification rate.
Actually we provide OEM/ODM services for many famous international brands in Europe and America.
We strictly control the thickness of plating layer of copper, nickel and chrome, usually our plating thickness is: Cu ≥ 15um, Ni ≥ 10um, Cr ≥ 0.15um, and can pass neutral 240 hours or acidic 48 hours salt spray test. We also customize your products for salt spray testing in excess of neutral 480 hours. And we promise never to use the return material directly for die-casting production.
A1: The bilateral design distributes physical stress evenly across both glass panels. This layout eliminates local pressure concentration points, which effectively prevents micro-cracks and structural failure over time.
A2: We offer Shore A 60, 70, and 90 hardness gaskets to match various glass specifications and sealing requirements. This creates a tightly compressed, watertight barrier to stop leaks completely.
A3: Due to the foolproof built-in alignment markers, the layout and alignment process is highly optimized, reducing typical installation time by up to 60% compared to standard conventional glass clamps.
A4: Yes, the clamp features a modular, future-proof design equipped with pre-drilled channels. This makes it ready for routing electrical wires for integrated LED lighting or steam systems.
A5: Our standard electroplating thickness is Cu ≥ 15um, Ni ≥ 10um, and Cr ≥ 0.15um, which easily passes a 240-hour neutral salt spray test or a 48-hour acid test. Custom options exceeding 480 hours are also available.
A6: No. We strictly promise never to use recycled or returned scrap material directly in our die-casting production. This guarantees maximum structural strength, reliability, and lifespan for every clamp.
